What is not a supported method for increasing the availability of a vCenter Server virtual machine?

What is not a supported method for increasing the availability of a vCenter Server virtual machine? 

A. vSphere High Availability
B. vSphere Fault Tolerance
C. vCenter Server Heartbeat
D. Site Recovery Manager







Answer: B

What is the correct order to install vCenter Server 5.x components?

What is the correct order to install vCenter Server 5.x components? 

A. vCenter Single Sign-On, Inventory Service, vCenter Server
B. vCenter Server, vCenter Single Sign-On, Inventory Service
C. vCenter Server, Inventory Service, vCenter Single Sign-On
D. vCenter Single Sign-On, vCenter Server, Inventory Service







Answer: A

An administrator is setting up a new vSphere environment for application development with health monitoring and capacity management. The administrator has purchased three servers for the initial install. The administrator is NOT planning to grow the environment and needs to keep costs as low as possible. Which vSphere kit should the administrator use to meet these requirements?

An administrator is setting up a new vSphere environment for application development with health monitoring and capacity management. The administrator has purchased three servers for the initial install. The administrator is NOT planning to grow the environment and needs to keep costs as low as possible.
Which vSphere kit should the administrator use to meet these requirements? 

A. vSphere Essentials Kit
B. vSphere Essentials Plus Kit
C. vSphere with Operations Management Standard Acceleration Kit
D. vSphere with Operations Management Enterprise Acceleration Kit







Answer: C

A large medical institution needs to centralize malware and anti-virus scanning in its environment. Which vSphere component will satisfy this requirement?

A large medical institution needs to centralize malware and anti-virus scanning in its environment.
Which vSphere component will satisfy this requirement? 

A. vShield Endpoint
B. vCloud Network and Security
C. vSphere Data Protection Advanced
D. vCenter Operations Manager







Answer: A

A large aerospace company utilizes a mission critical application requiring a large database server with 16 vCPUs and 500GB of RAM. Because of the critical nature of the application, the company also wants to leverage Reliable Memory Technology. What is the minimum edition of vSphere that will support this scenario?

A large aerospace company utilizes a mission critical application requiring a large database server with 16 vCPUs and 500GB of RAM. Because of the critical nature of the application, the company also wants to leverage Reliable Memory Technology.
What is the minimum edition of vSphere that will support this scenario? 

A. vSphere Standard Edition
B. vSphere with Operations Management Standard Edition
C. vSphere Enterprise Edition
D. vSphere with Operations Management Enterprise Edition






Answer: C

While testing a Fault Tolerance setup on a virtual machine, a system administrator notices that the DRS automation level of the virtual machine has been automatically set to Disabled. The administrator needs to enable DRS to migrate the Fault Tolerance virtual machine to balance the cluster's CPU and memory loads. What should the administrator do?

While testing a Fault Tolerance setup on a virtual machine, a system administrator notices that the DRS automation level of the virtual machine has been automatically set to Disabled. The administrator needs to enable DRS to migrate the Fault Tolerance virtual machine to balance the cluster's CPU and memory loads.
What should the administrator do? 

A. Enable Enhanced vMotion Compatibility (EVC) in the vSphere cluster.
B. Move the virtual machine to a VMFS 5 datastore built on shared storage.
C. Manually change the DRS automation level of the virtual machine to Enabled.
D. Move the secondary virtual machine to a host with a Fault Tolerance VMkernel port.







Answer: A

A vSphere administrator enables Fault Tolerance on a powered off virtual machine that has the following configuration:

A vSphere administrator enables Fault Tolerance on a powered off virtual machine that has the following configuration: 

A. Fault Tolerance inflated the virtual machine's virtual disk file.
B. Fault Tolerance created a temporary logging file on the same datastore.
C. Fault Tolerance created a secondary copy of the virtual machine's virtual disk file.
D. The Fault Tolerance logging file ran out of disk space.








Answer: A

Which Web service is installed during the vCenter Server installation?

Which Web service is installed during the vCenter Server installation? 

A. Internet Information Service (IIS)
B. WEBrick
C. Tomcat Web server
D. LiteSpeed Web server








Answer: C

Which information does the CPU Ready counter provide to a vSphere administrator?

Which information does the CPU Ready counter provide to a vSphere administrator? 

A. The virtual machine has requested CPU time, but the VMkernel cannot schedule the virtual CPU on a physical CPU.
B. The virtual machine is idle, and the VMkernel has idle physical CPU cycles.
C. The virtual machine has requested CPU time, and the VMkernel has idle physical CPU cycles.
D. The virtual machine is idle, but the VMkernel cannot schedule the virtual CPU on a physical CPU.







Answer: A

A vApp is performing poorly and an administrator determines that the memory resources are low. How should the administrator resolve this issue?

A vApp is performing poorly and an administrator determines that the memory resources are low.
How should the administrator resolve this issue? 

A. Configure a memory reservation for the vApp.
B. Configure a memory reservation for each VM in the vApp.
C. Rebuild the vApp using the wizard and assign memory reservations to the vApp.
D. Rebuild the vApp using the wizard and assign memory reservations to each VM.





Answer: A

A new LUN from an existing storage array is presented to a vSphere cluster. A vSphere administrator determines that the LUN is visible on all but one ESXi host in the cluster. The affected host is able to see existing LUNs presented from the same storage array. What is the most likely cause?

A new LUN from an existing storage array is presented to a vSphere cluster. A vSphere administrator determines that the LUN is visible on all but one ESXi host in the cluster. The affected host is able to see existing LUNs presented from the same storage array.
What is the most likely cause? 

A. LUN Masking is improperly configured on the storage array.
B. The SAN fabric is improperly zoned.
C. The ESXi host has NOT been rebooted.
D. The HBA in the host is incompatible with ESXi.






Answer: A

An organization's datastores are configured in a fully automated Storage Distributed Resource Scheduler (SDRS) cluster. The vSphere administrator determines that virtual machines are being migrated between datastores even though the datastores look evenly balanced. On further investigation, the administrator determines that the datastore's utilization percentages differ by 2%. Which Storage DRS setting should the administrator change to prevent the virtual machines from migrating prematurely?

An organization's datastores are configured in a fully automated Storage Distributed Resource Scheduler (SDRS) cluster. The vSphere administrator determines that virtual machines are being migrated between datastores even though the datastores look evenly balanced. On further investigation, the administrator determines that the datastore's utilization percentages differ by 2%.
Which Storage DRS setting should the administrator change to prevent the virtual machines from migrating prematurely? 

A. Edit the Storage DRS cluster settings to increase the percentage of the Space Utilization Difference threshold
B. Edit the Storage DRS cluster settings to increase the percentage of the I/O imbalance threshold
C. Edit the Storage DRS cluster settings to increase the size of the Space Utilization Difference threshold
D. Edit the Storage DRS cluster settings to increase the size of the I/O imbalance threshold






Answer: A

A vSphere administrator needs to configure a virtual machine to meet a guaranteed CPU performance profile. Which configuration setting could the administrator choose?

A vSphere administrator needs to configure a virtual machine to meet a guaranteed CPU performance profile.
Which configuration setting could the administrator choose? 

A. Set the CPU Limit to High
B. Set the CPU Shares to 500MHz
C. Set the CPU Guarantee to High
D. Set the CPU Reservation to 500MHz







Answer: D

A vSphere administrator is unable to vMotion a virtual machine between two hosts. An error message indicates that the USB device is not VMwareessible on the target host. What is causing this issue?

A vSphere administrator is unable to vMotion a virtual machine between two hosts. An error message indicates that the USB device is not accessible on the target host.
What is causing this issue? 

A. The USB device was not enabled for vMotion when it was added to the virtual machine.
B. ESXi does not support vMotion with a USB device attached to the virtual machine.
C. The VMkernel port for vMotion is not enabled for USB traffic.
D. The virtual machine has the wrong USB controller installed.







Answer: A

An administrator needs to create and provision new virtual machines from a master image that can not be edited or powered on. Which type of resource is most appropriate for the administrator to perform the task?

An administrator needs to create and provision new virtual machines from a master image that can not be edited or powered on.
Which type of resource is most appropriate for the administrator to perform the task? 

A. Full Clone
B. Linked Clone
C. Template
D. Snapshot







Answer: C

A system administrator is unable to clone a windows 2008 server while connected directly to an ESXi host through vSphere Client. Which two methods can be used to complete the task? (Choose two.)

A system administrator is unable to clone a windows 2008 server while connected directly to an ESXi host through vSphere Client.
Which two methods can be used to complete the task? (Choose two.) 

A. Connect to vCenter Server and retry the operation.
B. Use VMware Converter to perform the operation.
C. Connect to the host using the Web Client and retry the operation.
D. Use VMware Configuration Manager to perform the operation.






Answer: A,B

The vCenter Operations Manager dashboard shows Health issues associated with the selected virtual machine. There have been no availability or configuration issues associated with the virtual machine, and the workload badge is still green. What is the most likely reason for this health score?

The vCenter Operations Manager dashboard shows Health issues associated with the selected virtual machine. There have been no availability or configuration issues associated with the virtual machine, and the workload badge is still green.
What is the most likely reason for this health score? 

A. The workload for the virtual machine is higher than normal, which is generating a large number of anomalies within vCenter Operations Manager.
B. A high stress and a pattern of constrained resources has been attributed to the virtual machine in vCenter Operations Manager.
C. A recent migration to another host in the cluster has violated
H. admission control policy.
D. vCenter Operations Manager has determined that the time remaining for the virtual machine's assigned CPU resources is very low.







Answer: A

An administrator is preparing to install an additional Single Sign-On node on a stand-alone server. What information is required during the installation routine?

An administrator is preparing to install an additional Single Sign-On node on a stand-alone server.
What information is required during the installation routine? 

A. Active Directory domain name and credentials
B. System DSN
C. Partner Host Name
D. Lookup Service URL








Answer: C

A vSphere administrator needs to add more space to an existing 3-node Virtual SAN cluster. The attempts to add the new host to the cluster as a contributing member have failed. However, it can be added as a non-contributing member. The host was previously used in a single host configuration. The administrator recently upgraded the host from ESXi 5.1 to 5.5 prior to adding it to the cluster. What is the reason for this failure?

A vSphere administrator needs to add more space to an existing 3-node Virtual SAN cluster. The attempts to add the new host to the cluster as a contributing member have failed. However, it can be added as a non-contributing member.
The host was previously used in a single host configuration. The administrator recently upgraded the host from ESXi 5.1 to 5.5 prior to adding it to the cluster.
What is the reason for this failure? 

A. The only SSD disk in the new host was formatted with a VMFS datastore.
B. The new host has a 10Gbps NIC while the rest of the cluster members have 1Gbps NICs.
C. The RAID controller in the new host does not have enough cache for the Virtual SAN datastore.
D. The new host's VMFS datastores do not have sufficient capacity to be added as a contributing member.






Answer: A

An administrator decreases the CPU share value for two virtual machines in a DRS cluster from 1000 to 100 shares. The DRS cluster contains more resources than both virtual machines can consume. The characteristics of the virtual machines are listed below:

An administrator decreases the CPU share value for two virtual machines in a DRS cluster from 1000 to 100 shares. The DRS cluster contains more resources than both virtual machines can consume.
The characteristics of the virtual machines are listed below: 

A. The virtual machines will have equal performance under all conditions.
B. The performance of the virtual machines will reduce by a factor of ten once the share value is adjusted.
C. The virtual machines will have equal performance under normal conditions and reduced performance when contention occurs.
D. The original virtual machine will perform better than the clone when contention occurs.






Answer: A

A new LUN has been created on an iSCSI array and assigned to an ESXi 5.x server . However, when the administrator logs in to the vSphere Web Client the LUN is not visible. Other LUNs on the iSCSI array are visible. What should the administrator do to resolve this issue?

A new LUN has been created on an iSCSI array and assigned to an ESXi 5.x server . However, when the administrator logs in to the vSphere Web Client the LUN is not visible. Other LUNs on the iSCSI array are visible.
What should the administrator do to resolve this issue? 

A. Rescan for the new storage device
B. Ensure the LUN is zoned correctly
C. Add the new LUN to the Static Discovery list
D. Ensure the CHAP settings are correctly configured





Answer: A

An administrator needs to create an IP allocation policy for a multi-tiered application running in a vApp. The IP addresses should be allocated automatically by vCenter Server, but should not be released even if a virtual machine is powered off. Which IP allocation model should the administrator use for the vApp?

An administrator needs to create an IP allocation policy for a multi-tiered application running in a vApp.
The IP addresses should be allocated automatically by vCenter Server, but should not be released even if a virtual machine is powered off.
Which IP allocation model should the administrator use for the vApp? 

A. Static - Manual
B. Transient - IP Pool
C. DHCP
D. Static - IP Pool







Answer: D

A VMware administrator determines that a low priority virtual machine is negatively affecting the disk I/O performance of a higher priority virtual machine. The virtual machines are hosted on the same datastore presented to the same ESXi host. Which configuration option should the VMware administrator use to resolve this issue?

A VMware administrator determines that a low priority virtual machine is negatively affecting the disk I/O performance of a higher priority virtual machine. The virtual machines are hosted on the same datastore presented to the same ESXi host. Which configuration option should the VMware administrator use to resolve this issue? 

A. Increase the disk share value for the high priority VM.
B. Migrate the low priority VM to another ESXi host.
C. Create a Storage Profile for each priority level.
D. Enable vSphere APIs for Array Integration (VAAI).







Answer: A

Which privilege should the administrator assign to allow a user to create baselines using Update Manager?

Which privilege should the administrator assign to allow a user to create baselines using Update Manager? 

A. Manage baseline
B. Attach baseline
C. Stage baseline
D. Configure baseline





Answer: A

A number of virtual machines in a vSphere 5.5 DRS cluster are connected to the same virtual switch port group. After several of these VMs are migrated to another host, an administrator notices that they have lost network connectivity. The Events tab in vCenter Server shows this error message: Failed to initialize ethernet0. The vmkernel log file on the host running the affected VMs contains this message: Can't connect device:'port group name': Out of resources. Which caused this issue?

A number of virtual machines in a vSphere 5.5 DRS cluster are connected to the same virtual switch port group. After several of these VMs are migrated to another host, an administrator notices that they have lost network connectivity. The Events tab in vCenter Server shows this error message:
Failed to initialize ethernet0.
The vmkernel log file on the host running the affected VMs contains this message:
Can't connect device:'port group name': Out of resources.
Which caused this issue? 

A. Network I/O Control was enabled.
B. The DRS cluster containing the VMs was set to Fully Automated with the Migration Threshold set to Conservative.
C. There were insufficient uplinks configured on the virtual switches.
D. The virtual switch port allocation was changed from the default setting.






Answer: D

An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings?

An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? 

A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration








Answer: A

An administrator needs to provide a report that shows how many virtual machines can be added to an existing vSphere environment. Which report within vCenter Operations Manager meets this requirement?

An administrator needs to provide a report that shows how many virtual machines can be added to an existing vSphere environment.
Which report within vCenter Operations Manager meets this requirement? 

A. Cluster or Host Capacity Inventory Report
B. Configured Host Capacity Report
C. Virtual Machine Capacity Overview Report
D. Virtual Machine Optimization Report







Answer: A

Which two statements accurately describes step that are taken to recover a virtual machine using vSphere Replication? (Choose two.)

Which two statements accurately describes step that are taken to recover a virtual machine using vSphere Replication? (Choose two.) 

A. A recovery is initiated from the target site.
B. A recovery is initiated from the source site.
C. Upon recovery, the virtual machine is automatically attached to it's configured network.
D. Upon recovery, the virtual machine must be manually attached to a network.







Answer: A,D

Which two statements below could explain why the vSphere Client is reporting N/A for hyperthreading? (Choose two.) The physical CPUs in the host do not support hyperthreading.

Which two statements below could explain why the vSphere Client is reporting N/A for hyperthreading? (Choose two.)
The physical CPUs in the host do not support hyperthreading. 

A. Hyperthreading is disabled in the host's BIOS.
B. The physical CPUs in the host are not multi-core.
C. The number of CPUs meets or exceeds the maximum without hyperthreading.







Answer: A,B

The following error displays during the final step of the configuration for a VMware High Availability (HA) cluster attached to five datastores: The number of heartbeat datastores for host is 0, which is less than required. 2 What condition would cause this error?

The following error displays during the final step of the configuration for a VMware High Availability (HA) cluster attached to five datastores:
The number of heartbeat datastores for host is 0, which is less than required. 2 What condition would cause this error? 

A. One of the hosts in the cluster is not attached to the datastores planned for use with HA.
B. The hosts in the cluster do not have Storage DRS configured on one or more of their datastores.
C. One of the hosts in the cluster has an invalid Storage Policy configured on one or more of their datastores.
D. The hosts in the cluster contain one or more datastores configured with a 1 MB block size.







Answer: A

An administrator needs to provide a report that will help managers better understand how all of their virtual machines are sized. Which report within vCenter Operations Manager should the administrator provide?

An administrator needs to provide a report that will help managers better understand how all of their virtual machines are sized.
Which report within vCenter Operations Manager should the administrator provide? 

A. Undersized Virtual Machines Report
B. Configured Host or Cluster Capacity Report
C. Virtual Machine Capacity Overview Report
D. Virtual Machine Optimization Report







Answer: D

An external direct connected Organization Network is configured, but no traffic is being passed to the external network. What would cause this to occur?

An external direct connected Organization Network is configured, but no traffic is being passed to the external network. What would cause this to occur? 

A. A vSphere administrator accidentally deleted a vShield Edge appliance.
B. The port group backing the external network was configured with a duplicate VLAN.
C. The port group backing the external network was configured with no active uplinks.
D. The network pool backing the external network has been exhausted.







Answer: C

An administrator needs to create an external Organization Network that resides on a particular VLAN. How should the administrator proceed?

An administrator needs to create an external Organization Network that resides on a particular VLAN. How should the administrator proceed? 

A. Create a VLAN-backed network pool.
B. Create a network isolation-backed network pool.
C. Create a port group on a vSphere Distributed Switch configured with the required VLAN.
D. Create a vSphere Standard Switch with uplinks on the appropriate VLAN.







Answer: C

An administrator needs to create an organization network to be shared by multiple vApps. Access to vApps from outside the vCloud implementation should be available. Which two network types would meet these requirements? (Choose two.)

An administrator needs to create an organization network to be shared by multiple vApps. Access to vApps from outside the vCloud implementation should be available. Which two network types would meet these requirements? (Choose two.) 

A. External Direct
B. vApp
C. External vApp
D. External Routed






Answer: A,D

Two Organizations need to configure a network solution that allows communication between one another. The vApps deployed within the two organizations should reside on the same subnet. Which organization network type would meet this requirement?

Two Organizations need to configure a network solution that allows communication between one another. The vApps deployed within the two organizations should reside on the same subnet. Which organization network type would meet this requirement? 

A. External Routed
B. External Direct
C. VLAN-backed
D. Internal





Answer: B

Which two steps must be taken prior to configuring an external, direct connected Organization Network? (Choose two.)

Which two steps must be taken prior to configuring an external, direct connected Organization Network? (Choose two.) 

A. Install a vShield Edge device on a vSphere port group.
B. Create an external network within vCloud Director.
C. Create a network pool in vCloud Director.
D. Create a vSphere port group manually.






Answer: B,D

An administrator is unable to find network traffic details while running vCloud hierarchy reports. The network administrator confirms that there was network traffic during the report time span. Which collector is configured incorrectly?

An administrator is unable to find network traffic details while running vCloud hierarchy reports. The network administrator confirms that there was network traffic during the report time span. Which collector is configured incorrectly? 

A. vCenter Data Collector
B. vCenter Chargeback Data Collector
C. vCloud Data Collector
D. vShield Manager Data Collector






Answer: D

An administrator needs to import a user group. Which requirement must be satisfied in order to accomplish this?

An administrator needs to import a user group. Which requirement must be satisfied in order to accomplish this? 

A. vCloud Director must be connected to a valid LDAPv3 server.
B. vCloud Director must be configured to use Kerberos authentication.
C. vCloud Director must be joined to an AD domain.
D. vCloud Director must be joined to an LDAP domain.







Answer: A

In vCloud Director, the default System Administrator and Organization Administrator roles differ in which way?

In vCloud Director, the default System Administrator and Organization Administrator roles differ in which way? 

A. The System Administrator role includes the right to create and modify roles.
B. The Organization Administrator role includes the right to edit organization properties.
C. The System Administrator role includes the right to edit catalog properties.
D. The Organization Administrator role includes the right to view organizations.






Answer: A

An existing vCloud Director environment that has been operational for a year is suddenly inaccessible via its web site. The error: Could not verify this certificate for unknown reasons appears. Which course of action should an administrator take to address this problem?

An existing vCloud Director environment that has been operational for a year is suddenly inaccessible via its web site. The error: Could not verify this certificate for unknown reasons appears.
Which course of action should an administrator take to address this problem? 

A. Issue the command service vmware-vcd stop. Obtain or generate a new security certificate. Install the certificate using /opt/vmware/cloud-director/bin/configure. Start the vCD service.
B. Access the vCloud Director administration web site through the internal network address. From within the Security option under the Administration tab, generate a new, self-signed certificate.
C. Generate a new certificate using keytool from within the vCD VM. Change the permissions on the resulting certificates.ks file to be readable by vcloud.vcloud. Issue the command service vmware-vcd restart.
D. Issue the command service vmware-vcd stop. Install a new certificate using the command keytool ?keystore certificates.ks ?storetype JCEKS ?storepass passwd ?genkey ?keyalg RSA ? alias http. Issue the command service vmware-vcd start.






Answer: A

An organization builds a new datacenter containing vSphere clusters and a new vCenter Server. The organization needs to add a new vCD cell to the existing architecture. What must be done to achieve this?

An organization builds a new datacenter containing vSphere clusters and a new vCenter Server. The organization needs to add a new vCD cell to the existing architecture.
What must be done to achieve this? 

A. Complete the configuration of vCloud Director and vShield Manager at the new datacenter.
B. Attach the new vCenter Server from the Administration tab in the vCloud Director GUI.
C. Enable linked mode for the vCenter Servers, then register the new vCenter Server with the existing vCloud Director and vShield Manager.
D. Complete the configuration of vCloud Director at the new datacenter and enable linked mode fpr the vCenter Servers.







Answer: A

Due to diminishing capacity, an ESXi host is added to a cluster that supports a cloud environment. A vCloud Administrator notices that newly created VMs created through vCD are not utilizing the host resource. What is the reason for this?

Due to diminishing capacity, an ESXi host is added to a cluster that supports a cloud environment. A vCloud Administrator notices that newly created VMs created through vCD are not utilizing the host resource. What is the reason for this? 

A. An inventory synchronization was not performed after the new host was added to the cluster.
B. The host was not manually added to an organizational vDC before it was utilized.
C. The host was not prepared to be part of the vCD environment.
D. DRS was not enabled on the cluster providing resources to the vCD environment.







Answer: C

Which two LDAP configurations are supported by vCD? (Choose two.)

Which two LDAP configurations are supported by vCD? (Choose two.) 

A. Windows 2008 R2 with Active Directory and Kerberos SSL authentication
B. SUSE Linux with OpenLDAP and Simple SSL authentication
C. Redhat Linux with OpenLDAP and Kerberos SSL authentication
D. Windows 2008 with Active Directory and Simple SSL authentication







Answer: A,B

Which vSphere technology must be enabled on an ESXi cluster backing vCD?

Which vSphere technology must be enabled on an ESXi cluster backing vCD? 

A. VMware DRS
B. VMware HA
C. VMware FT
D. VMware DPM





Answer: A

While off-premise, an administrator receives a support notification and needs to check on the environment using a browser accessing vcloud.vmware.com. Assuming vCloud Connector has been installed, what is required for the administrator to have full visibility and control of VMs residing within the private cloud?

While off-premise, an administrator receives a support notification and needs to check on the environment using a browser accessing vcloud.vmware.com.
Assuming vCloud Connector has been installed, what is required for the administrator to have full visibility and control of VMs residing within the private cloud? 

A. A connection into the corporate environment that is being used.
B. A domain trust relationship configured as part of SSL certificate installation within vCloud Connector.
C. The ?Data Push? feature enabled within vCloud Connector.
D. A web browser supported by vCloud Connector.







Answer: A

During a proof of concept, an organization experiences issues uploading VMs internally to its private cloud catalog. What could be causing the issue?

During a proof of concept, an organization experiences issues uploading VMs internally to its private cloud catalog. What could be causing the issue? 

A. The vCloud transfer storage location is undersized.
B. The vCloud database was sized incorrectly.
C. The vCloud Connector has run out of temporary storage.
D. Thresholds established in the vCenter Chargeback cost model have been exceeded.






Answer: A

An author needs to create a configuration that will modify certain aspects of each VM when deployed. Where can the Guest OS Customization tab be found?

An author needs to create a configuration that will modify certain aspects of each VM when deployed. Where can the Guest OS Customization tab be found? 

A. In the properties of a vApp Template.
B. In the properties of a VM within a deployed vCloud vApp.
C. In the properties of a deployed vCloud vApp.
D. In the properties of a VM within a vApp Template.







Answer: B

An administrator is unable to create an Organization catalog. What is a possible cause?

An administrator is unable to create an Organization catalog. What is a possible cause? 

A. The Organization has no Organization vDC associated.
B. The Provider vDC is out of resources.
C. The administrator is not a System Administrator.
D. The Organization vDC is out of resources.





Answer: A

An administrator notices that an end user has exhausted the cluster?s resources originally provisioned to its Pay-As-You-Go organization. The administrator needs to add additional resources on another vCenter Server and provide it to this Organization. Which two steps allow for the most efficient way to complete this task? (Choose two.)

An administrator notices that an end user has exhausted the cluster?s resources originally provisioned to its Pay-As-You-Go organization. The administrator needs to add additional resources on another vCenter Server and provide it to this Organization.
Which two steps allow for the most efficient way to complete this task? (Choose two.) 

A. Create a new cluster on the new vCenter Server.
B. Add the new cluster to the Organization.
C. Add the new cluster to the Provider VDC.
D. Create a new secondary Organization.






Answer: A,C

An administrator needs a list of all Resource Pools that are allocated to all Provider vDCs in a vCloud implementation. Where will the administrator find this information?

An administrator needs a list of all Resource Pools that are allocated to all Provider vDCs in a vCloud implementation. Where will the administrator find this information? 

A. by running a Resource Usage report from vCenter Chargeback
B. by reviewing the Resource Pools from vCenter Resources
C. by reviewing the Resource Allocation from vCenter Resources
D. by running a Resource Allocation report from vCD







Answer: B

Which two courses of action are required in order to license a vCloud Director installation? (Choose two.)

Which two courses of action are required in order to license a vCloud Director installation? (Choose two.) 

A. Using the vSphere client, go to Home > Licensing and add the license key for vShield Manager into vCenter.
B. Using the vCD GUI, enter in the vCloud Director license key.
C. Using the vSphere client, go to Home > Licensing and add the license key for vCloud Director into vCenter.
D. Using the vCD GUI, enter in the vShield Manager license key.








Answer: A,B

Which two components are required for a vCloud infrastructure installation? (Choose two.)

Which two components are required for a vCloud infrastructure installation? (Choose two.) 

A. AMQP Broker
B. vCloud Connector
C. vShield Manager
D. Oracle/MS SQL database







Answer: C,D